Tekonsha Prodigy RF Wireless Trailer Brake Controller
If you want to tow a camper or other trailer with electric brakes - and your truck or SUV does not have a built-in brake controller - this unit will add that electric brake functionality without splicing into your vehicle wiring.
$150
Call Bill at: 585-5zero6-61zero8
No texts or emails please. This post will be removed when sold
Features:
• Brake controller activates trailer brakes in proportion to your vehicle's braking action
• Automatically adjusts trailer's braking based on deceleration of tow vehicle
• Activates immediately - no pausing like with time-delayed brake controllers
• Wireless system remote control lets you operate trailer-mounted power module from cab of any vehicle
• Automatic-leveling ability - internal sensor detects deceleration even if controller is not mounted flat
◦ Position within ± 5 degrees of level in the horizontal plane
• 3 Boost levels let you adjust initial braking power and aggressiveness
• Continuous diagnostic check alerts you to any potential problems
• Integrated safeguards protect your vehicle and trailer
• Minimizes drain on car battery when not in use
• Prevents trailer brakes from overheating by reducing power output to them during prolonged stops
• Digital display on remote is easy to read
• Manual override button is built into remote
• No hardwiring necessary for installation
• 7-Pole connector on trailer plugs into 7-way socket on rear of power module
• Wire lead on power module plugs into tow vehicle's 7-way connector
◦ Connector on your vehicle must have an active 12V (hot) lead
• Remote control plugs into standard 12V accessory outlet in cab
• Compatible with tow vehicles that have multiplex wiring systems
We used it with a camper towed by a SUV. (We now have a truck with built-in brake control so no longer need this unit).
https://www.tekonsha.com/product/902502_trailer-brake-control-proportional
https://www.amazon.com/Tekonsha-90250-Prodigy-Electronic-Control/dp/B001P0ZA86
Installation Details