SNOW PLOW with A frame - $500 (Depew)

google map

QR Code Link to This Post

This snowplow is built like a tank and probably could be mounted on a dozer to push dirt, along with the attached "A" frame this was originally installed (new) on a 1962 international farm tractor. The plow is 6 feet 6 inches wide, 24 inches high and the blade is 1/4 inch thick...this heavy duty older style plow and frame are well made of heavy: angle iron, pins and bolts.. see the 2nd last pic which shows the 1 inch diameter mounting holes the inside width opening is 16.5 inches and to the outside is 19 inches...several years ago this plow and frame were completely sand blasted and a yellowish/green zinc chromate industrial rust preventive paint applied which has kept it in overall good condition...see the close up detailed pics for more info/condition...its estimated weight is appox. 500-700 lbs so ideally you could load it on a trailer with a ramp as you could then winch it up onto it as there is no machinery to help load it...NOTE this must be done in dry weather as it is stored on a off road backyard grassy area.... call show contact info and leave a message will then call you back... PRICE $500

post id: 7845510625

posted: 2025-04-26 16:23

updated: 2025-09-17 21:15

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.

SNOW PLOW with A frame - farm & garden - by owner - sale - craigslist