· Equivalent of Bachelors degree in electrical engineering with specialization in power and lighting systems
· Knowledge in power distribution system is preferred.
· Minimum of 5-10 years of engineering experience in fire alarm, ground assembly lighting, power and control systems
· Experience working on Commercial, K-12, Higher Educational and Health Care
· Registered Professional Engineer
· Knowledge of Auto Cad and Revit design is preferred.
· Adherence to clients' design standards and requirements
Mechanical Engineer must have 5-10 years experience. He is experienced in HVAC Design and PM for Commercial, Educational projects.
PE is preferred, Will loot EIT
Electronic and Engineering Technicians are responsible for performing functions associated with manufacturing operations in either laboratory or manufacturing settings. The candidate will conduct tests on RF and digital assemblies/subassemblies using assorted test equipment (i.e. oscilloscopes, network analyzers, digital voltmeters), technical databases and electronic schematic diagrams to isolate and troubleshoot printed circuit board (PCB) malfunctions to the component level.
Qualifications
High School Diploma or GED with minimum 4 years electronics working experience required OR Associates Degree in Electronics with 2 years electronics working experience required
Recent college graduates welcome
Must be able to troubleshoot to component level on radio communication equipment
Positions are on a one year contract in Rochester, NY
An interview and testing are requirements for placement
Available Shifts
2nd Shift Monday thru Thursday - 3:00 pm to 1:30 am or possibly 3:30 pm to 2:00 am
3rd Shift Friday, Saturday and Sunday 6:00 am to 6:30 pm
4th Shift Friday, Saturday and Sunday 6:00 pm to 6:30 am (shift would end Monday am)
Responsible for evaluating electronic parts and components through a comparison of performance specifications to device datasheets, test and evaluation of component samples, prototype testing, using analog and digital test equipment such as oscilloscope, spectrum analyzer, analysis and reporting of test results, design and fabrication of test circuits and test fixtures for the evaluation of prototype hardware, and facilitating the release of new products, hardware assemblies, and firmware into production. Participates in the testing of radio systems, as well as assisting with the configuration management of HW and SW baselines.
Requirements:
Experience in design/development engineering, can interpret schematics, is familiar with test and debug of microprocessor or DSP based digital circuits. Experienced with configuration management systems. FPGA programming and experience with hardware troubleshoot for digital, analog and RF circuits, a plus.
Capable of performing circuit board modifications using SMT and Through Hole technology
Excellent communications skills, written and verbal. Team oriented individual with proven experience as a liaison between Engineering and Manufacturing.
Special Skills Required (i.e. Microsoft Word, Troubleshoot to component level, etc.):
Electronic CAD experience, Mentor Graphics preferred. Programming experience in VB, Lab View, or C a plus. Analog background including experience with DC power supplies and RF power amplifiers a plus. Basic hardware troubleshooting ability with analog and RF circuits a plus.
Basic knowledge of networking and wireless technology a plus. Working knowledge of Microsoft Word, Excel, and Outlook preferred.
Yoh National Accounts has an opening for an Electronic/Engineering Technician in Rochester, NY for an international communications and information technology company. This is a temporary assignment of approximately one year.
Description:
Electronic and Engineering Technicians are responsible for performing functions associated with manufacturing operations in either laboratory or manufacturing settings. The candidate will conduct tests on RF and digital assemblies/subassemblies using assorted test equipment (i.e. oscilloscopes, network analyzers, digital voltmeters), technical databases and electronic schematic diagrams to isolate and troubleshoot printed circuit board (PCB) malfunctions to the component level.
Qualifications:
- High School Diploma or GED with minimum 4 years electronics working experience required OR Associates Degree in Electronics with 2 years electronics working experience required.
- Current (3rd yr) or Recent college graduates welcome.
- Must be able to troubleshoot to component level on radio communication equipment.
Available Shifts:
2nd Shift Monday thru Thursday - 3:00 pm to 1:30 am or possibly 3:30 pm to 2:00 am
3rd Shift Friday, Saturday and Sunday 6:00 am to 6:30 pm
4th Shift Friday, Saturday and Sunday 6:00 pm to 6:30 am
To apply for this position, please send an email with your resume as an attachment.
Job Responsibilities
Perform opto-mechanical requirements analysis
Design and simulate opto-mechanical and electro-optic assemblies
Specify round-trip optical path designs
Design CMOS image sensor microlens and imaging lens
Design Laser- and LED-based light source illuminators
Develop innovative technology and product concepts
Develop affordable, manufacturable products that meet performance and cost requirements
Create and maintain opto-mechanical documentation
Minimum Requirements
BSEE/BSCS (MSEE/MSCS preferred in related field)
5+ years opto-mechanical development experience
Demonstrated delivery of opto-mechanical designs in high-volume production
Knowledge of light source illumination designs, both LED and Laser-based
Successful history of low-cost, high-performance lens & diffuser designs
Experience with offshore CMs and lens manufacturers
Proficiency in Solidworks and Zemax
Proven ability to create good quality documentation, worthy of delivery to customers
Demonstrated ability to recognize problems and develop workable solutions with commitment to follow through to final resolution
Excellent written and verbal communication skills
Additional Desired Experience
CMOS image sensor design experience, including microlens design
Consumer electronics industry experience
Demonstrated ability to work effectively in a fast-paced, team oriented, cross-functional and highly dynamic environment, and to meet customer commitments and program deadlines
Professional Skills Required:
Strong time management & organizational skills.
Read and understand architectural and technical drawings.
Analyze technical data presented in charts and tables.
Proficient with Excel, Visio, AutoCAD, and MS Word.
Reference technical specifications and manuals.
Preferred Requirements:
Years of Relevant Work Experience: 1-3 years Preferred.
Technical Knowledge in HVAC Systems, Mechanical Design, Geoexchange Theory, Pump Theory. Preference will be given to those with an HVAC or building background with a focus on radiant, geothermal, and/or solar.
The data center was built out in the early 1970s, and has yet to be refreshed. It has a number of mainframe, mid range, and Intel boxes (2000 or so), with malfunctions in electrical, AC, fire suppression, security, and no Disaster Recovery in place.
Client needs a 25 year + vet who knows how to design a data center from ground up. They need someone who can refurbish a legacy data center. This is short term 3 week gig exclusively for the purpose of giving a full blown assessment of what it will take to refurbish the entire data center.
If interested, please email carmella@qrcinc.com with an updated copy of your resume or visit our website at www.qrcinc.com. QRC is an engineering recruiting firm; this is an open position of an affiliate company.
The successful candidate must have the following abilities:
-Possess an associates Degree in Electronics Technology or equiv. military training or experience
-Hands-on experience diagnosing and troubleshooting at component level
-Hands-on experience with associated test equipment used in troubleshooting
-Have basic knowledge of power supply, audio, IF, RF, and related circuit theory
-Properly follow assembly instructions, revision instructions, etc.
-Proper and accurate through-hole and SMT soldering skills
-Very strong attention to detail
-Possess strong verbal and customer support skills
-Possess PC based computer skills
-Interact with inside technical, engineering, and management teams.
-Reliable and highly motivated.